Peavey IPR2 2000 DSP 1,800Watts Power Amplifier w/EQ, Crossover+Mic + (2) Cables.
- 1800 Watt RMS Lightweight Power Amplifier. 1050W RMS x 1 at 2 ohms. 570W RMS x 1 at 4 ohms. 300W RMS x 1 at 8 ohms. 900W RMS x 2 at 2 ohms. 515W RMS x 2 at 4 ohms. 290W RMS x 2 at 8 ohms. DDTTM assurance. Progressive IPR class D topology. Detented input controls. Blend XLR 1/4″ inputs.
- Combination 1/4″ or 1/4″ 4 post wind bolt yield connector. Light weight. Singular flag pass-through 1/4″ jacks on each channel. Driven enlightened. DSP-based Loudspeaker Management System. 120 ms of deferral for each channel. 4 groups of parametric leveling per channel. Security bolt. Customizable fourth-arrange Linkwitz-Riley Crossover.
- IPR2 DSP clients can look over a bank of prominent Peavey and non specific amplifier writes, including models from the Peavey QW®, SP®, EUTM, Impulse®, PR® and SSETM Sanctuary Series, and also standard 10-, 12-and 15-inch amplifiers. Program EQ bends incorporate shake, pop, jazz, hip jump, contemporary love, discourse and acoustic. An implicit security bolt is selectable for all capacities or everything except volume.
- Dynamic cardioid amplifier intended for stand-mount application. On/off switch. Spotless, common sound. Low pop and dealing with commotion. Strong Zinc kick the bucket cast body. Low-gleam dark wrap up. Incorporates conveying pocket, mic clasp and 6 meter XLR link. Recurrence Response: 80Hz-12000Hz. Affectability: – 53dBV/PA (2.2mV/PA). Yield Impedance: 500 ohms
- Peavey PV 25′ 16 Gauge ¼” to ¼” Speaker Cable – 100% Copper. Rough 16-check 2-conductor link built of premium quality unshielded link with dark matte coat. Highlights quality expansive barrel 1/4″ telephone plugs. 25 foot length.
Peavey® gladly reports the accessibility of the progressive IPR2TM 2000 DSP control intensifier. Stacked with a selective advanced flag handling suite, IPR2 DSP Series amps are imaginative, powerful live generation apparatuses for both front-of-house and screens.
The IPR2 2000 DSP control enhancer consolidates easy to use amplifier administration with the honor winning, lightweight power and execution of the first Peavey IPR control intensifiers. The locally available computerized flag handling framework incorporates preset banks for prevalent amplifier composes and designs, and in addition Waves® MaxxBass® psycho-acoustic preparing without precedent for any power intensifier.
Highlights:
Peavey IPR2 2000 DSP 1800 Watt RMS Lightweight Power Amplifier
1050W RMS x 1 at 2 ohms
570W RMS x 1 at 4 ohms
300W RMS x 1 at 8 ohms
900W RMS x 2 at 2 ohms
515W RMS x 2 at 4 ohms
290W RMS x 2 at 8 ohms
DDTTM insurance
Progressive IPR class D topology
Detented input controls
Blend XLR 1/4″ inputs
Blend 1/4″ or 1/4″ 4 post turn bolt yield connectorr
Light weight
Singular flag pass-through 1/4″ jacks on each channel
Driven lit up
DSP-based Loudspeaker Management System
120 ms of deferral for each channel
4 groups of parametric balance per channel
Security bolt
Low-shine dark wrap up
Incorporates conveying pocket, mic clasp and 6 meter XLR link
Recurrence Response: 80Hz-12000Hz
Affectability: – 53dBV/PA (2.2mV/PA)
Yield Impedance: 500 ohms
Peavey PV 25′ 16 Gauge ¼” to ¼” Speaker Cable – 100% Copper
Rough 16-check 2-conductor link built of premium quality unshielded link with dark matte coat
Highlights quality extensive barrel 1/4″ telephone plugs
Peavey IPR2 2000 DSP 1,800Watts Power Amplifier w/EQ, Crossover+Mic + (2) Cables, dj speakers with amplifier,dj amp rack,peavey dj equipment.
Reviews
There are no reviews yet.