Lithonia Lighting (Pack of 6) 9.6W Ultra Thin 4″ Dimmable Recessed Ceiling Light, 3000K, White, Easy to install, Save Time and Money, Energy Efficient LED Lighting.
- Easy and Safe Installation – imaginative, thin outline takes into account simple retrofit, redesign or new development establishment from underneath the roof. Just need 2″ leeway for install
- Highly Rated for Multiple Locations – CSA, IC, Airtight and Wet Location recorded make LED Wafer perfect for indoor and open air private, neighborliness, business and multifamily applications and safe to contact insulation
- Extremely Bright Dimmable LEDs utilize 9.6 watts to furnish 675 lumens with a 80 CRI, just about 70 lumens for each watt. Diminishes down to 10% and perfect with select Lutron, Levitron, Synergy and Sensor Switch dimmers
- Ultra Thin LED outline just requires a 4.2 inch roof gap and 2 crawls of roof space are expected to fit LED wafer recessed light and UL perceived driver
- Saves Time and Money changing knobs – Energy Star rating gives high light yield insignificant influence use and will most recent 36,000 hours or +16 years when on consistently for 6 hours/day
The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box consolidates superb light yield and effectiveness while disposing of the pot light lodging for aggressive reasonableness. This creative wafer thin Type IC configuration permits simple establishment for new development or redesign from underneath the roof without the prerequisite of a pot light lodging.
Technical Specifications:
- • Power: 9.6W
- • Input Voltage: 120V (Connects straightforwardly to control supply by means of gave UL perceived driver)
- • Luminous Flux: 675LM
- • Emitting Color: 3000K(Bright White)
- • Dimmable: Yes
- • Light Source: LED
- • CRI: 80
- • Surface Size: 4.7 inches
- • Back Hole Size: 4 inches
- • Dimension: 4.7 x 4.7 x 1.1 inches
- • Light heading: Downlight
- • Average life: 36,000 hours
- • Warranty: 5 years – Limited
- • Meets Highest Industry Standards: CSA confirmed in the USA and Canada, Energy Star Rated, IC Rated, Wet Listed and Air Tight
More electrical data and finish rundown of perfect dimmers are situated on spec sheet
Installation Guide:
- 1. Twofold check and measure the roof gap.
- 2. Open the front of the remote driver box. Push and expel one of the knockouts as an afterthought plate.
- 3. Interface the remote driver box to the light installation and fix nut connector.
- 4. Place remote driver box through the cut-out gap.
- 5. Force the spring cut on the apparatus up and through the roof gap. Place module in the gap
- 6. Turn the power on
- Establishment direct for unit incorporated into the bundle.
Leave a Reply