General Tools LTM1 2-in-1 Laser Tape Measure, 50’ Laser Measure, 16’ Tape Measure. 

  • 2 TOOLS IN 1-The Laser Tape Measure consolidates a 50ft laser measurer with a 16ft tape measure
  • MEASURE 10X FASTER-Long separation estimating from a laser, is presently combined with limited ability to focus of a measuring tape, giving you a chance to gauge everything faster
  • MEASURE 2X FURTHER-Measures twice to the extent a standard 25ft. tape measures
  • ONE HAND OPERATION-No requirement for somebody to hold the opposite end of the measuring tape, basically utilize the catch actuated laser. Maintain a strategic distance from the tape twisting or snapping back when the sharp edge is retrieved.
  • CLASS II LASER PRODUCT

The 2-in-1 Laser Tape Measure is an inventive item from General Tools that consolidates two precise estimating instruments into one item. It is a 50ft laser remove measurer with a 16ft measuring tape. Presently you can rapidly and effortlessly get both long-separate estimations and limited ability to focus from a similar instrument! With measuring tape close by effortlessly read the extensive, clear LCD screen for a brisk advanced perusing of the laser remove measurer.

Both DIYers and Professionals will swing to this device for its one individual, one hand convenience task.

This 2-in-1 Laser Tape Measure is moderate, solid, reduced and gives you the opportunity to work at your own pace and take care of business. Rapidly measure the length of a room, decide the width of a table, or hang a photo outline.

All that you require is in the palm of your hand with the General Tools 2-in-1 Laser Tape Measure.

See underneath under Technical Specification for the full User Manual

GENERAL TOOLS – THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering more than 1,000 instruments, we’re glad to give tradesmen, specialists and DIYers around the globe with a wide scope of reasonable, particular reason mechanical hand apparatuses and exactness estimating and examination devices.

For request, please contact our Customer Service Department at 212-431-6100. We endeavor to give our clients 100% fulfillment ensured.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Frequently Asked Questions

Q: Can I change the reference purpose of the Laser measurement?

A: The laser estimation reference is settled at the back edge of the LTM1, inverse the laser pointer (where the battery compartment is). It considers the length of the body of the measuring tape in the perusing.

Q: Can I change the unit of the Laser measurement?

A: Measurements are just shown in feet and partial inches. Metric isn’t accessible on the LTM1.

Q: How does the laser remove measure part work?

A: The laser estimation framework works by sparkling a laser pillar on an objective. The time it takes for the impression of the shaft to come back to the instrument is utilized to figure the separation to the objective.

Q: Can laser estimation work without the red laser bar?

A: No, the laser bar is expected to get an estimation when utilizing the laser work. The tape can be utilized for manual estimations whenever.

Q: What are conceivable reasons why a perusing could be off base?

  • The laser pointer is precarious or moving too rapidly. To unfaltering the laser, press the back of the instrument (the agree with the battery compartment) against a level subject, for example, the divider or floor.
  • The target is nearer than the base scope of 10 in or past the greatest scope of 50 ft.
  • The surface of the objective is excessively intelligent. You can influence an objective to plate at first glance utilizing tape or a bit of paper.
  • There is excessively brilliant, noticeable light on the objective. Giving shade or making a dim target plate at first glance can settle this.
  • The target can retain approaching IR radiation and reflects nothing back to the instrument. Illustrations would be plasma TV’s or PC screens. Once more, making an objective plate would be the solution.
  • The target is excessively straightforward, making it impossible to get a legitimate perusing. An objective plate will be important to get the measurement.
  • The encompassing temperature is outside the predefined working reach (32ºto 104ºF).

Q: How would I withdraw the tape measure?

A: The tape bolt discharge catch is on the base of the measuring tape.

Q: Why is my unit not turning on?

A: Make beyond any doubt to check the course your batteries. The battery in the (+) opening ought to be put positive side looking out toward you, and the one in the (- ) space ought to be put negative side looking out toward you. It would be ideal if you allude to the Quick Start Guide, which can be downloaded on this page. In the event that you are as yet experiencing difficulty please contact Technical Support at 844-841-9878.

Weight 0.8 kg
Dimensions 7.2 × 6.5 × 2.01 cm
Brand

General Tools

Color

Laser Tape Measure

EAN

0681035017975

Manufacturer

General Tools

Binding

Tools & Home Improvement

Model

LTM1

MPN

LTM1

NumberOfItems

1

ReleaseDate

2017-05-07

PartNumber

LTM1

Size

50'

UPC

681035017975

Studio

General Tools

Publisher

General Tools

Reviews

There are no reviews yet.

Be the first to review “General Tools LTM1 2-in-1 Laser Tape Measure, 50’ Laser Measure, 16’ Tape Measure”

Price may be subject to changes any time. We are trying to update the prices, although we recommend visit the seller page for final price and shipping options.